External Condition
We inspect the body, cylinder, and finish for dents, corrosion, paint deterioration, or any physical damage that could compromise the extinguisher's integrity or safe operation.
Keeping your premises compliant and your equipment ready. Honest advice, thorough servicing, and no unnecessary costs across Dorset, Hampshire, and Wiltshire.
We service, supply, and maintain fire extinguishers for businesses of all sizes - from small workshops and offices to warehouses, retail sites, and managed properties. Our team brings real operational fire safety experience. We know what works, what doesn't, and how to keep you compliant. Whether you need an annual service on existing equipment, a 5-year extended overhaul, or straightforward advice on whether replacement is the right call, we handle it. No overselling, no unnecessary costs.

All servicing is carried out in strict accordance with BS 5306-3, the British Standard for fire extinguisher maintenance. On an annual service we check:
We inspect the body, cylinder, and finish for dents, corrosion, paint deterioration, or any physical damage that could compromise the extinguisher's integrity or safe operation.
We check the extinguisher is fully charged; for stored-pressure models we verify the gauge is reading within the correct range; for CO2 extinguishers we weigh the cylinder to confirm the gas charge is within the recommended tolerance.
We check the safety pin, tamper seal, discharge hose, and nozzle for blockages, wear, or damage; anti-tamper devices and sealing O-rings are replaced at every service.
We confirm the extinguisher is correctly mounted, clearly signed, and accessible, all of which are requirements under the Fire Safety Order.
We update the service label on the extinguisher and provide a written maintenance record for your compliance files; this documentation is a legal requirement.
Not every extinguisher needs replacing, and we'll always tell you honestly which route makes more sense. Replacing equipment unnecessarily costs you money. Keeping equipment that's past its useful life puts you at risk.
If your extinguisher is within its service life, structurally sound, and passes inspection, servicing is almost always the more cost-effective option; a well-maintained extinguisher can remain in service for many years.
We will recommend replacement when an extinguisher is severely corroded, structurally compromised, or has failed an extended service inspection. We supply and install a full range of BS EN3 approved extinguishers, including water, foam, CO2, dry powder, and wet chemical, ensuring you have the right type and coverage for your specific fire risks.
Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person for any commercial premises (typically the business owner, employer, or building manager) must ensure that all fire-fighting equipment is appropriate, accessible, and properly maintained.
Annual servicing is a legal requirement. British Standard 5306-3 specifies that all fire extinguishers in commercial and public buildings must be serviced at least once a year by a competent person. Using an unqualified technician does not satisfy this requirement.
Monthly visual checks are your responsibility. In addition to the annual professional service, the Responsible Person must carry out a basic visual inspection every month. This means confirming extinguishers are in their designated location, unobstructed, undamaged, and that the tamper seal is intact. It does not require technical knowledge, but it does need to be done and recorded.
Records must be kept. Every service, inspection, and replacement must be documented. These records must be available for inspection by the fire authority, your insurer, or during a health and safety audit. We provide a full written service report after every visit.
The consequences of non-compliance are serious. Failing to maintain fire extinguishers can invalidate your business insurance, result in fines or prosecution under the Fire Safety Order, and, most critically, mean your equipment fails when it is needed most.
We take the administration out of compliance. We track your service schedule, remind you when a visit is due, and provide all the documentation you need to demonstrate that your premises are properly maintained.
Extinguisher servicing is priced per unit, with the certificate included.
Extinguisher servicing (certificate included)
| 1 to 4 extinguishers | £12.50 each |
| 5 to 10 extinguishers | £8.00 each |
| 11 to 20 extinguishers | £7.50 each |
| 21 to 40 extinguishers | £7.00 each |
| 41 to 99 extinguishers | £5.95 each |
| 100 or more extinguishers | £4.85 each |
Prices exclude VAT. Certificate included.
No call-out fee.
Limited companies can spread the cost over 3 or 12 months.
Founder and Director, 34 years with the Dorset fire service, FIA member
Founder and Director of Abbey Fire Safety. 34 years with the Dorset fire service and a member of the Fire Industry Association (FIA).
View Darren's LinkedInWe work with businesses and property managers across the South. If you're responsible for fire safety on a premises, we can help.
Can't find what you're looking for? We're happy to help.
Our Fractional Fire Safety Officer looks after this and everything else that keeps you compliant, for one monthly fee. From £100 a month for a single site.
A written, prioritised assessment of your premises and the steps needed to stay compliant.
Learn moreOngoing, part-time fire safety responsibility for your business without a full-time hire.
Learn morePractical training that prepares your staff to lead safe evacuations and use extinguishers.
Learn moreGet expert fire safety support with over 30 years of experience across Dorset, Wiltshire, Hampshire and beyond. You'll receive a free site survey and only ever be recommended what you genuinely need. No overselling, no unnecessary costs.